Configuration Tool

Welcome to the Penflex Configuration Tool.
To begin, read the instructions below and fill out your information.

What is the Penflex Configuration Tool?

This tool was developed to allow the distributors and end users of Penflex hose to build drawings and specs for each specific application. It's a service that we've provided by request for years, and now we've automated it for your convenience.

To begin specifying a corrugated metal hose assembly, there is some information that must be gathered regarding the application. To help remember these parameters, they have been arranged in the acronym STAMPED.

[S]ize	Diameter of the fittings to be used on the assembly.
[T]emperature	Minimum and maximum temperatures to which the assembly will be exposed.
[A]lloy	Material of each assembly component. If the materials are not known, then both the media (along with their concentrations) that will be conveyed through the assembly as well as to which the assembly may be exposed.
[M]otion	Type of motion (bending, flexing, vibration, etc) with magnitude and frequency
[P]ressure	Maximum pressure to which the assembly will be exposed, noting spikes, pulsation, and vacuum
[E]nd Fittings	Fitting types compatible with the hose and existing piping system.
[D]eveloped Length	Overall length of the assembly. If the overall length is not known then the dimensions of the installation including all movements must be defined.

In addition to the STAMPED parameters, there are other factors that should be considered:

Flow. Very high velocities may require the use of a liner
Additional protections (i.e. guards and covers)
Conformance to other standards
Physical space limitations
Enhanced life cycle requirements
Heat treatment
Special requests including hose constructions, attachment methods, fitting orientations, tolerances, testing, cleaning, packaging or documentation.

Please fill out the information below so that we can better track and label your drawings.

Note: Please use the latest version of Chrome, Firefox, Safari, or Internet Explorer 10 or higher.

Company / Client Name*
Email*
Project Name*
Client Project ID*

Please fill out your hose specifications below. As you make your selections, it will narrow the possible answers in the other filters to only what is compatible.
Left Column
Indicate Hose Specifications
Indicate Hose Specifications*
Max Operating Temp*
Temp Measurement (°F or °C)*
Max Operating Pressure*
Pressure Measurement*
Right Column
Movement Specifications
Movement*
Flow Condition*
Special Movement*
End Right Column
Hose and Braid Alloy Selections
Hose Alloy*
Braid Alloy*
Enter Live Length & Select a Product Below
Begin Left Column #2
Approx Length*
Length Measurement*
Enter Length Overall
Approx Length*
Length Measurement*
Begin Right #2
Help! (Show the calculator)
- Help! I have a dynamic length. Show me a calculator!
End Right Column #2

Choose the fittings desired for your applications. You can choose a different fitting for each end.
Choose Your Fittings
Begin Left Column
Fitting 1 (Left)*
Fitting Alloy*
Begin Right Column
Fitting 2 (Right)*
Fitting Alloy*
End Right Column

Please review your information below
before finalizing your drawing.
Review Your Information

Here is your requested drawing and the specifics for
the materials needed to build it.
Review Your Information
Email PDF Save Drawing Contact Sales Include PDF in Email
CAPTCHA

Penflex Client Login

Penflex - Flexible Piping Solutions

Configuration Tool

Configuration Tool

What is the Penflex Configuration Tool?

This tool was developed to allow the distributors and end users of Penflex hose to build drawings and specs for each specific application. It's a service that we've provided by request for years, and now we've automated it for your convenience.

Please fill out the information below so that we can better track and label your drawings.

Note: Please use the latest version of Chrome, Firefox, Safari, or Internet Explorer 10 or higher.

Left Column

Indicate Hose Specifications

Right Column

Movement Specifications

End Right Column

Hose and Braid Alloy Selections

Enter Live Length & Select a Product Below

Begin Left Column #2

Enter Length Overall

Begin Right #2

End Right Column #2

Choose Your Fittings

Begin Left Column

Begin Right Column

End Right Column

Review Your Information

Review Your Information